top of page

Unmentionables Group

Public·12 members
Aaron Matthews
Aaron Matthews

Free download Opel OpCOM 200603a Software till Opel 2021


Op-com Software 100820b: What is it and How to Use it?




If you own an Opel/Vauxhall car, you may have heard of Op-com Software 100820b, a collection of software from Fantomel for diagnosing electronic equipment of Opel/Vauxhall cars from 1987 to 2021. Op-com Software 100820b is the latest version of the software that supports vehicle diagnostics until 2021. It requires an Op-com interface with board version OPCOM V5 and correct PIC18F458 chip to work. In this article, I will explain what Op-com Software 100820b is and how to use it to perform various diagnostic functions on your car. I will also discuss the features, benefits, and limitations of Op-com Software 100820b, and answer some frequently asked questions about it.




Op-com Software 100820b



Features of Op-com Software 100820b




Op-com Software 100820b is a powerful and versatile software that allows you to access and control various electronic modules and systems of your Opel/Vauxhall car. Some of the main features of Op-com Software 100820b are:


  • It can read and clear fault codes from almost all control units, such as engine, transmission, ABS, airbag, instrument cluster, etc.



  • It can display live data and parameters from various sensors and actuators, such as engine speed, coolant temperature, throttle position, fuel pressure, etc.



  • It can perform output tests and actuations on various components, such as injectors, relays, solenoids, fans, lamps, etc.



  • It can program and code various settings and functions, such as immobilizer, keys, remote controls, service intervals, radio codes, etc.



  • It can perform special functions and adaptations, such as injector coding, throttle reset, steering angle calibration, DPF regeneration, etc.



  • It can access advanced features and hidden menus, such as security access codes, ECU information, diagnostic procedures, etc.



Op-com Software 100820b differs from previous versions in several ways. For example:


  • It supports more models and systems of Opel/Vauxhall cars up to 2021.



  • It has a more user-friendly interface and design.



  • It has more options and functions for customization and configuration.



  • It has improved stability and performance.



  • It has updated firmware for the Op-com interface.



Compatibility of Op-com Software 100820b




To use Op-com Software 100820b effectively, you need to meet some requirements for both hardware and software. Here are the compatibility details of Op-com Software 100820b:


Hardware requirements of Op-com Software 100820b




The hardware components that you need to use Op-com Software 100820b are:


  • A computer with Windows XP, Vista, 7, 8, 8.1 or 10 operating system (both x86 and x64).



  • An Op-com interface with board version OPCOM V5 and correct PIC18F458 chip. The interface should have genuine VID and PID (6001) and use FTDI driver that is maximum 2.10.0.0. The interface should also have proper firmware version 1.67. You can use the included OCFlash tool to flash the firmware if needed.



  • A USB cable to connect the interface to the computer.



  • An OBD-II cable to connect the interface to the car.



Software requirements of Op-com Software 100820b




The software components that you need to use Op-com Software 100820b are:


  • The installation package of Op-com Software 100820b. You can download it for free from here [6](https://mega.nz/file/i35jgCoY#4IrMo9c0ykw_hFA-FwJMchxftoST_TmwYj85GVO2kO4) or here [5](https://rapidshare.io/4md/OP-COM_Multi_by_Fantomel.zip). No password is needed. The installation package includes the USB drivers for the interface.



  • The software versions and drivers that are compatible with your car model and system. You can check the compatibility list from here [2](http://op-com.hu/Downloads_EN.aspx). You may need to install or update some software versions or drivers to use some functions or features of Op-com Software 100820b smoothly.



</ul Installation of Op-com Software 100820b




Once you have the hardware and software components ready, you can proceed to install Op-com Software 100820b on your computer. The installation process is simple and straightforward. Here are the steps to install Op-com Software 100820b:


  • Extract the installation package of Op-com Software 100820b to a folder on your computer. You can use any extraction tool, such as WinRAR or 7-Zip.



  • Run the setup.exe file from the extracted folder. Follow the instructions on the screen to install Op-com Software 100820b on your computer. You may need to accept some license agreements and choose some options during the installation.



  • Connect your Op-com interface to your computer using the USB cable. Wait for the computer to recognize the interface and install the USB drivers automatically. You can check the device manager to see if the interface is detected and installed correctly.



  • Run the OCFlash tool from the extracted folder. This tool will help you flash the firmware of your Op-com interface to version 1.67, which is required for Op-com Software 100820b. Follow the instructions on the screen to flash the firmware. You may need to select the correct COM port and press some buttons on the interface during the flashing process.



  • Restart your computer after the installation and flashing are completed. You can now run Op-com Software 100820b from your desktop or start menu.



Operation of Op-com Software 100820b




After you have installed Op-com Software 100820b and flashed your Op-com interface, you can start using it to diagnose your car. The operation process is easy and intuitive. Here are the steps to use Op-com Software 100820b:


  • Connect your Op-com interface to your car using the OBD-II cable. Make sure that your car's ignition is on, but do not start the engine.



  • Run Op-com Software 100820b from your computer. You will see a main menu with several options, such as Diagnostics, Measuring Blocks, Output Tests, Remote Controls, etc..



  • Select Diagnostics from the main menu. You will see a list of car models and systems that are supported by Op-com Software 100820b.



  • Select your car model and system that you want to diagnose. For example, if you have a 2010 Astra J and you want to diagnose the engine control unit (ECU), you can select Astra-J > Engine > Z16XER (LDE) [ME7.6.2].



  • You will see a sub-menu with several options, such as Fault Codes, Live Data, Actuators, Programming, etc..



  • Select the option that you want to perform. For example, if you want to read and clear fault codes from the ECU, you can select Fault Codes.



  • You will see a screen with information and instructions about the selected option. For example, if you selected Fault Codes, you will see a screen with a button to read fault codes, a list of fault codes (if any), and a button to clear fault codes.



  • Follow the information and instructions on the screen to perform the selected option. For example, if you want to read fault codes from the ECU, you can press the Read Fault Codes button and wait for the results.



  • Repeat steps 3-8 for other car models and systems that you want to diagnose.



Benefits of Op-com Software 100820b




Using Op-com Software 100820b has many benefits for car owners and enthusiasts who want to diagnose their Opel/Vauxhall cars. Some of these benefits are:


Cost-effectiveness of Op-com Software 100820b




Op-com Software 100820b is a cost-effective solution for diagnosing your car's electronic system. Compared to other diagnostic tools or services, Op-com Software 100820b has several advantages in terms of cost:


  • It is free to download and use. You only need to pay for the hardware components, which are relatively cheap and widely available online or offline.



  • It can save you money on car maintenance and repairs by helping you identify and fix problems yourself instead of going to a mechanic or dealer.



  • It can prevent future problems and expenses by helping you monitor and optimize your car's performance and condition regularly.



Reliability of Op-com Software 100820b




Op-com Software 100820b is a reliable solution for diagnosing your car's electronic system. Compared to other diagnostic tools or services, Op-com Software 100820b has several advantages in terms of reliability:


  • It is accurate and precise. It can read and display the exact fault codes, live data, and parameters from your car's control units, without any errors or delays.



  • It is comprehensive and versatile. It can access and control almost all electronic modules and systems of your car, without any limitations or restrictions.



  • It is safe and secure. It can prevent any damage or harm to your car's electronic system by using proper protocols and procedures, without any risks or hazards.



User-friendliness of Op-com Software 100820b




Op-com Software 100820b is a user-friendly solution for diagnosing your car's electronic system. Compared to other diagnostic tools or services, Op-com Software 100820b has several advantages in terms of user-friendliness:


  • It is easy and intuitive. It has a simple and clear interface and design that makes it easy to navigate and operate, without any confusion or complication.



  • It is customizable and configurable. It has many options and functions that allow you to adjust and modify various settings and features, according to your preferences and needs.



  • It is informative and educational. It has detailed information and instructions that help you understand and learn more about your car's performance and condition, without any jargon or technicalities.



Limitations of Op-com Software 100820b




Despite its many benefits, Op-com Software 100820b also has some limitations or challenges that you need to be aware of and overcome. Some of these limitations are:


Hardware requirements of Op-com Software 100820b




The hardware components that you need to use Op-com Software 100820b are not always easy to find or obtain. You may face some difficulties or issues in terms of hardware requirements, such as:


  • The availability and quality of the Op-com interface. Not all online or offline sellers offer genuine or high-quality Op-com interfaces with board version OPCOM V5 and correct PIC18F458 chip. You may encounter fake or faulty interfaces that do not work properly with Op-com Software 100820b.



  • The compatibility and functionality of the USB cable. Not all USB cables are compatible or functional with the Op-com interface and the computer. You may experience connection problems or errors if you use a wrong or defective USB cable.



  • The compatibility and functionality of the OBD-II cable. Not all OBD-II cables are compatible or functional with the Op-com interface and the car. You may experience connection problems or errors if you use a wrong or defective OBD-II cable.



Software compatibility of Op-com Software 100820b




The software components that you need to use Op-com Software 100820b are not always up-to-date or compatible with your car model and system. You may face some difficulties or issues in terms of software compatibility, such as:


  • The availability and quality of the installation package of Op-com Software 100820b. Not all online sources offer genuine or high-quality installation packages of Op-com Software 100820b. You may encounter corrupted or infected files that do not install properly on your computer.



  • The compatibility and functionality of the software versions and drivers for your car model and system. Not all software versions and drivers are compatible or functional with Op-com Software 100820b. You may experience compatibility problems or errors if you use outdated or incorrect software versions or drivers.



Legal issues of Op-com Software 100820b




The legal or ethical implications of using Op-com Software 100820b are not always clear or consistent with the laws or regulations of your country or region. You may face some difficulties or issues in terms of legal issues, such as:


  • The legality and morality of using Op-com Software 100820b for personal or commercial purposes. Some countries or regions may prohibit or restrict the use of diagnostic tools or services for certain purposes, such as modifying, hacking, cloning, etc.. You may violate some laws or regulations if you use Op-com Software 100820b for illegal or unethical purposes.



  • The liability and responsibility of using Op-com Software 100820b for diagnosing your car's electronic system. Some countries or regions may hold you liable or responsible for any damage or harm that may result from using diagnostic tools or services, such as Op-com Software 100820b. You may face legal or financial consequences if you cause or contribute to any damage or harm to your car or other cars by using Op-com Software 100820b.



Conclusion




Op-com Software 100820b is a collection of software from Fantomel for diagnosing electronic equipment of Opel/Vauxhall cars from 1987 to 2021. It is a powerful and versatile software that allows you to access and control various electronic modules and systems of your car. It has many features, benefits, and limitations that you need to know and understand before using it. In this article, I have explained what Op-com Software 100820b is and how to use it to perform various diagnostic functions on your car. I have also discussed the features, benefits, and limitations of Op-com Software 100820b, and answered some frequently asked questions about it. I hope that this article has helped you learn more about Op-com Software 100820b and how to use it effectively.


FAQs




Here are some of the frequently asked questions about Op-com Software 100820b:


  • What is OP-COM?



OP-COM is a diagnostic tool for Opel/Vauxhall cars. It consists of an interface device that connects to the car's OBD-II port and a software program that runs on a computer. OP-COM can read and clear fault codes, display live data, perform output tests, program and code various settings and functions, and perform special functions and adaptations on almost all electronic modules and systems of Opel/Vauxhall cars.


  • What is OPCOM V5?



OPCOM V5 is the latest board version of the OP-COM interface device. It has a correct PIC18F458 chip that supports the latest firmware version 1.67. OPCOM V5 is required for using Op-com Software 100820b, which supports vehicle diagnostics until 2021.


  • How do I flash my OPCOM interface firmware?



You can flash your OPCOM interface firmware using the OCFlash tool that is included in the installation package of Op-com Software 100820b. You need to connect your OPCOM interface to your computer using the USB cable, run the OCFlash tool, select the correct COM port, and follow the instructions on the screen to flash the firmware. You may need to press some buttons on the interface during the flashing process.


  • How do I scan my car with OP-COM software?



You can scan your car with OP-COM software by connecting your OPCOM interface to your car using the OBD-II cable, running OP-COM software from your computer, selecting Diagnostics from the main menu, selecting your car model and system that you want to diagnose, and selecting the option that you want to perform, such as Fault Codes, Live Data, Actuators, Programming, etc.. You can follow the information and instructions on the screen to perform the selected option.


  • Where can I get more information or support for OP-COM software?



You can get more information or support for OP-COM software from various online sources, such as:


  • The official website of OP-COM: [1](http://op-com.hu/)



  • The official forum of OP-COM: [4](http://www.opcomforum.com/)



  • The official YouTube channel of OP-COM: [3](https://www.youtube.com/channel/UCwXy0x9YQ6l8xqZa6QZfW7w)



  • The unofficial Facebook group of OP-COM: [7](https://www.facebook.com/groups/OPCOM.Fantomel/)



dcd2dc6462


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page